NWS Local Storm Reports: What They Are, How to Use Them
National Weather Service Local Storm Reports are one of the most useful public sources of ground truth after severe weather. They are also easy to misread. This guide explains what they are, what each field means and how to use them well.
What is a Local Storm Report?
A Local Storm Report (LSR) is a report of severe or significant weather issued by a local National Weather Service Weather Forecast Office. Each report describes something that was observed on the ground: a hailstone measured in someone's driveway, a wind gust recorded by a weather station, a tornado sighting, trees down across a road or water over a street.
LSRs are public. They are issued during and after events and are used by forecasters to confirm what their warnings were based on. The Storm Prediction Center also compiles reports into national daily summaries.
Who files them
Reports come from many sources, and the source is listed on each report. Common ones include:
- Trained spotters, including volunteers in the NWS SKYWARN program
- Emergency managers
- Law enforcement and fire departments
- NWS employees and damage survey teams
- Automated weather stations and mesonets
- Broadcast media
- The public, including social media reports reviewed by forecasters
The source matters. A measured gust from an automated station or a hail size measured by a trained spotter generally carries more weight than an estimate from an untrained observer.
What an LSR contains
| Field | What it tells you |
|---|---|
| Time | When the event was observed |
| Location | A place name and usually latitude/longitude |
| Event type | Hail, thunderstorm wind gust, wind damage, tornado, flood, flash flood and others |
| Magnitude | Hail size in inches or wind speed in mph, where applicable |
| Measured or estimated | Whether the magnitude was measured or estimated |
| Source | Who reported it |
| Remarks | Free-text details, such as "trees down on house" or "roof damage to barn" |
The remarks field is often the most valuable. It can describe damage to specific structures, which helps connect the weather to physical loss.
Common report types for property work
Hail
Hail reports give a size in inches. The NWS considers hail of 1 inch or larger severe. A cluster of reports at or above that size around a property is strong supporting evidence for a hail claim.
Thunderstorm wind
Wind reports may give a measured gust, an estimated gust or a description of damage without a speed. The NWS severe thunderstorm wind threshold is 58 mph. Damage reports such as downed trees or power lines help show that damaging wind reached an area even when no instrument recorded it.
Tornado
Tornado reports mark sightings or damage. They are preliminary. The final track and EF rating come from NWS damage surveys done after the event. See our guide on the EF scale.
Flood and flash flood
Flood reports describe water over roads, water entering structures, rescues and similar observations. They help confirm that flooding reached an area and when.
How to use LSRs well
Measure distance to the property
An LSR is a point. Hail and wind vary over short distances, so the distance between a report and a property matters. Note it every time. A report a few blocks away is far more relevant than one in the next town.
Read the time carefully
Check the time zone. LSRs are typically issued in local time, while some national summaries use UTC. A late-evening storm can appear on a different calendar date depending on the source.
Use them alongside storm footprints
LSRs show what happened at specific points. Storm footprints, such as hail swaths or tornado paths, estimate what happened everywhere in between. Together they're much stronger than either alone.
Treat them as preliminary
LSRs are issued quickly and may be corrected. The NCEI Storm Events Database, built from NWS Storm Data, is the official record and is published later. For litigation or disputed claims, note which source you relied on.
Limits to keep in mind
- Coverage follows people. More reports come from populated areas and roads. Rural and agricultural areas can take damage with few or no reports.
- No report doesn't mean no damage. Absence of an LSR near a property is not evidence the storm missed it.
- Estimates vary. Estimated hail sizes and wind speeds are less reliable than measured ones.
- Location precision varies. Some reports are tied to a town center or intersection.
- Maximums are not averages. A report of the largest stone someone found is not the typical size across an area.
How each team uses them
- Public adjusters use nearby LSRs to document conditions at a property on the date of loss. Any outreach to owners must follow each state's solicitation rules.
- Roofers and restoration companies use them to confirm where damaging hail or wind actually reached the ground before planning inspections.
- Attorneys use them to build timelines and support causation, typically alongside the official Storm Events record and expert analysis.
Finding the right reports fast
Pulling LSRs by hand means searching by office, date and area, then plotting coordinates and measuring distances yourself. That's workable for one property. It doesn't scale to a storm that crossed several counties, or to a claim file that needs reports from an event years ago.
What helps most is seeing the reports on the same map as the property and the storm footprint, with distance, source and remarks visible at a glance. For a step-by-step workflow, see how to verify date of loss.
How Dorothy helps
- Dorothy shows storm reports near any address with distance and time.
- Loss Engine finds the affected properties in your territory down to the building and qualifies them for your team.
- Every property is matched to its property details and owner of record.
