What Size Hail Damages a Roof? A Guide for Pros
"What size hail damages a roof?" has a short answer and a correct answer. The short answer is "around an inch and up." The correct answer is "it depends on the roof, the wind and the storm," and that's the one that holds up on an inspection or a claim.
The 1-inch benchmark and where it comes from
The National Weather Service classifies hail of 1 inch in diameter or larger as severe. Before 2010 the threshold was three-quarters of an inch. The change was made partly because larger hail is more closely tied to damage.
Many people in roofing and claims use 1 inch as a rough line where damage to asphalt shingles becomes a real possibility. That's a reasonable heuristic. It is not a rule. Smaller hail can damage older or brittle materials, and larger hail can bounce off a well-built, impact-rated roof.
Hail size reference
Hail is usually reported by comparison to common objects. These are the standard references used by the NWS:
| Comparison | Diameter |
|---|---|
| Penny | 0.75 in |
| Quarter | 1.00 in |
| Ping pong ball | 1.50 in |
| Golf ball | 1.75 in |
| Tennis ball | 2.50 in |
| Baseball | 2.75 in |
Object comparisons are convenient, but they're estimates. A measured stone with a ruler or calipers carries more weight than "about golf ball size."
What actually determines roof damage
Roof material
Different coverings fail in different ways:
- Asphalt shingles. Hail can fracture the mat, knock off granules and expose the asphalt underneath. Bruising may not be obvious from the ground.
- Metal. Panels often dent before they leak. Whether dents are cosmetic or functional damage is a common point of dispute, and policy language on cosmetic damage varies.
- Clay and concrete tile. Can crack or break, especially older tile.
- Wood shake. Hail can split shakes, and weathered wood is more vulnerable.
- Slate. Can crack or break on impact.
- Low-slope commercial membranes (TPO, EPDM, PVC, modified bitumen). Hail can puncture or crack membranes and crush insulation boards underneath. Damage may be hard to see without a close inspection.
Age and condition
Roofing materials lose flexibility as they age. A shingle roof near the end of its life is generally more vulnerable than the same product when new. Prior damage, poor ventilation and previous repairs also change how a roof responds.
Impact-resistance ratings
Many roof coverings are tested under UL 2218, which rates impact resistance from Class 1 to Class 4. The test drops steel balls of increasing size onto the product: 1.25 inches for Class 1, 1.5 for Class 2, 1.75 for Class 3 and 2 inches for Class 4. Class 4 is the highest rating.
A rating is a lab result, not a guarantee. Real hail varies in density and shape, and it often arrives with wind. Still, knowing whether a roof is impact-rated is one of the most useful facts you can have before an inspection.
Wind speed and direction
Wind changes everything about hail impact. Wind-driven hail strikes at an angle, adds energy and hits surfaces that straight-down hail would not, such as siding, windows, screens, fences and the windward slope of a roof.
Two properties that saw the same hail size can have very different damage if one was exposed to stronger wind. That's why hail size alone is an incomplete picture.
Hailstone character and duration
Hard, dense stones do more damage than soft or slushy ones of the same size. Irregular stones with spikes can damage differently than smooth ones. A storm that drops hail for a long time can do more damage than a brief burst of the same size.
Collateral damage as evidence
Inspectors often look at softer surfaces to confirm that damaging hail fell at a property:
- Gutters and downspouts
- Roof vents, flashing and pipe boots
- Air conditioner fins
- Window screens and wraps
- Painted surfaces and outdoor furniture
Collateral marks help show direction and approximate size. They don't prove roof damage on their own, but they support a consistent story.
Hail size is local
One more complication: the hail size at a property is not the same as the largest hail reported in the storm. Hail cores can be narrow, and size changes across the swath. A report of 2.5-inch hail five miles away says little about a property on the edge of the storm.
Use property-level hail size estimates, then compare them with nearby ground reports. Our guide to NWS Local Storm Reports explains how to read those reports and their limits.
How different teams use this
- Roofers use hail size, wind and roof type to decide where inspections are likely to find damage, and which commercial or industrial roofs deserve a closer look.
- Public adjusters use property-level storm data and ground reports to document conditions at the property on the date of loss, and to understand which owners may have exposure. Any contact with owners must follow each state's solicitation rules.
- Property owners and managers use the same data to decide which buildings to inspect first and to document what hit each address.
Practical rules of thumb
- Treat 1 inch as a screening threshold, not a verdict.
- Always pair hail size with wind speed.
- Know the roof: material, age and impact rating.
- Check collateral damage to confirm direction and size.
- Use the hail size at the property, not the storm maximum.
- Confirm the date of loss, especially in areas with repeated storms. See how to verify date of loss.
How Dorothy helps
- Loss Engine monitors hail and wind in your territory and shows storm reports near each address with distance and time, including measured hail sizes.
- Property details (property type, building size, year built, roof type where available) help separate homes from commercial and multifamily roofs.
- Qualified properties are delivered to your team daily, weekly or monthly.
